• RHODIUS LD403S 125x12x19x22mm All in One Disc
  • RHODIUS LD403S 125x12x19x22mm All in One Disc – alternate view 1
  • RHODIUS LD403S 125x12x19x22mm All in One Disc – alternate view 2
1 3

Rhodius

RHODIUS LD403S 125x12x19x22mm All in One Disc

RHODIUS LD403S 125x12x19x22mm All in One Disc

£155.81
£155.81
Sale Sold out
Tax included. Shipping calculated at checkout.
Wall slits in just one operation. The further developed ALL IN ONE is perfectly equipped with a combination of 1+2 or 2+2 diamond qualities. The turbo segments of the straight diamond blades on the outside enable particularly clean and straight slitting. The wave-shaped geometry of the internal diamond cutting blade(s) ensures that the wall slot is optimally cleared. LD403S for 20 mm and LD404 for 30 mm wide slots.
  • No need to chisel out the centre bar
  • Reduction of dirt and dust
  • Up to 50% time savings through milling in one operation
  • Enables easy milling of wall slots (up to 40 mm slot depth)
Machine suitability:

The diamond blade LD403 S ALL IN ON is suitable for manual use with the wall slot milling machine. Especially on high-performance machines, it can fully play to its strengths.

Material suitability:

The LD403S ALL IN ONE has been specifically developed for the processing of hard masonry bricks, concrete, paving bricks, medium-hard marble bricks, hard concrete blocks, blocks and hollow blocks. This RHODIUS quality tool is also very well suited for the processing of hard sand-lime brick and sandstone.

Construction and production:

The LD403S ALL IN ONE has a segmented cutting edge. This achieves a very high cutting speed with maximum service life at the same time. The segments are also interlocked. The tool is tested according to EN13236 and oSa and can be used in dry cutting.
Thanks to the high-quality industrial diamonds and a very high diamond concentration, the LD404 ALL IN ONE is particularly powerful. The pane is also laser-welded and already fully assembled.

Quality:

With the LD403S ALL IN ONE, the user receives the best RHODIUS tool in its category. RHODIUS TOPline products stand for the highest level of performance and quality.

Application:

With the LD403S ALL IN ONE, grooves and channels in masonry can be slotted quickly and easily. The annoying removal of the center bar is no longer necessary. The material is removed quickly, cleanly and almost completely. With the LD403 S, the user reaches his goal almost 50% faster when slitting masonry and uses a tool with outstanding cutting performance and a particularly long service life.

Dimensions:

The RHODIUS diamond cutting blades LD403S ALL IN ONE is available in diameters of 125 mm and 150 mm. The segment height of the segmented diamond cutting blades is 12 mm for both variants. The disc enables easy milling of wall slots up to 20 mm wide.

Industries:

In combination with a wall groove milling machine, the LD403S ALL IN ONE diamond blade is the perfect tool for everyday challenges in the construction and plumbing trades, interior design and renovations. It makes work easier and, above all, faster.

View full details